Stare exceptionala.

Performance specifications
Switch fabric bandwidth
160 Gbps for the switch; Up to 1,280 Gbps for the full stack Stacking bandwidth
80 Gbps for the switch; Up to 640 Gbps for the full stack
Maximum data throughput
768 Gbps for a full stack of BayStack 5510-48T
Frame forwarding rate
71.4 Mpps (million packets per second) for the BayStack 5510-48T; 571.4 Mpps for a full stack of 8 BayStack 5510-48T units.
Port forwarding/filtering performance
For 10 Mbps: 14,880 pps maximum (64-byte packets)
For 100 Mbps: 148,810 pps maximum
For 1000 Mbps: 1,488,100 pps maximum
Address database size: 48,000 entries at line rate (48,000 entries
without flooding)
Addressing: 48-bit MAC address
Frame length: 64 to 1518 bytes (IEEE 802.1Q Untagged)
64 to 1,522 bytes (IEEE 802.1Q Tagged)
Jumbo frame support: Up to 9,216 bytes
Multi-Link Trunks: Up to six trunks, four members per trunk
VLANs: Up to 256 port- or protocol-based per VLAN Tagging
option
Multiple Spanning Tree Groups: Up to eight STGs
Interface options
10BASE-T/100BASE-TX/ 1000BASE-T
RJ-45 (8-pin modular) connectors for Auto MDI/MDI-X interface
with auto-polarity
The BayStack 5510 Switches support the following SFP GBICs:
1000BASE-SX
Uses short wavelength 850 nm MTRJ or LC type fiber optic
connectors to connect devices over multimode (275m, 62.5um
core or 550m, 50.0um core) fiber optic cable
1000BASE-LX
Uses long wavelength 1300nm duplex LC type fiber optic
connector to connect devices over single mode (10km, 9um
core) fiber optic cable
1000BASE-CWDM
Uses long wavelength 1470*********510, 1530, 1550, 1570,
1590, 1610nm LC type fiber optic connector to connect
devices over single mode (40km, 9um core or 70km, 9um core)
fiber optic cable
Network protocol and standards compatibility
IEEE 802.3 10BASE-T (ISO/IEC 8802 3, Clause 14)
IEEE 802.3u 100BASE-TX (ISO/IEC 8802-3, Clause 25)
IEEE 802.3u Autonegotiation on Twisted Pair (ISO/IEC 8802-3, Clause 28)
IEEE 802.3x (Flow Control on the Gigabit Uplink port)
IEEE 802.3z 1000BASE-SX and 1000BASE-LX
IEEE 802.1d MAC Bridges (ISO/IEC 10038)
IEEE 802.1p (Prioritizing)
IEEE 802.1Q (VLAN Tagging)
IEEE 802.1D Spanning Tree Protocol
IEEE 802.3ad (manual/static)
IEEE 802.3ad (LACP)
IEEE 802.1s
IEEE 802.1w
IETF DiffServ
RFC support
RFC 1213 (MIB-II); RFC 1493 (Bridge MIB); RFC 2863 (Interfaces Group MIB);
RFC 2665 (Ethernet MIB); RFC 2737 (Entity MIBv2); RFC 2819 (RMON MIB);
RFC 1757 (RMON); RFC 1271 (RMON); RFC 1157 (SNMP); RFC 2570 (SNMPv3);
RFC 2571 (SNMP Frameworks); RFC 2573 (SNMPv3 Applications);
RFC 2574 (SNMPv3 USM); RFC 2575 (SNMPv3 VACM); RFC 2576 (SNMPv3);
RFC 2572 (SNMP Message Processing)
RFC 791 (IP); RFC 792 (ICMP); RFC 793 (TCP); RFC 783 (TFTP); RFC 826 (ARP);
RFC 768 (UDP); RFC 854 (TELNET); RFC951 (Bootp); RFC 2236 (IGMPv2);
RFC 1112 (IGMPv1); RFC 1945 (HTTP v1.0); RFC 2138 (RADIUS);
RFC 894 (IP over Ethernet); RFC 2674 (Q MIB); RFC 1058/RFC 1723 (RIPv1/v2)
RFC 2178 and RFC1583 (OSPF)
RFC 2030 (SNTP [Simple NTP])