Postat 09 mai 2024
Generator de functii semnal 1hz - 500khz sinusoidal triunghiular etc
150 lei
Persoana fizica
Stare: Nou
Livrare cu verificare
Descriere
Alege produsele dorite si in cel mai scurt timp sunt la tine acasa!
Termen de livrare:
1-2 zile de la data confirmarii comenzii prin Curier
Plata se va face ramburs,direct la curier,la primirea coletului.
Comenzile multiple sunt livrate intr-un singur colet si suporta o singura taxa de transport!
Pentru a vizualiza celelalte oferte ,click pe anunturile vanzatorului.
FG-100 DDS Function Signal Generator Frequency Counter 1Hz - 500KHz Signal Source Module Sine+Square+Triangle+Sawtooth Waveform
Main features:
Compact in size, fully functional, easy to operate, and easy to carry. It can be powered by an adapter or a lithium battery. Together with an oscilloscope, it can be used for electronic circuit testing and debugging, as well as testing and measuring the frequency characteristics and pulse response of audio amplifiers. Due to the good accuracy and frequency stability of DDS, it is also very suitable for oscilloscope scanning time factor calibration. The square wave output is suitable for adjusting the pulse characteristics of oscilloscope attenuators and probes.
Main technical indicators:
1. Frequency range: Sine wave 1Hz-500kHz
(The frequency with flat output amplitude reaches 200 kHz, and the output amplitude will decrease as the frequency further increases),
Other waveforms range from 1Hz to 20kHz (but the upper limit of adjustable frequency is not limited. If there is no high requirement for distortion and shaking, the frequency can be further increased).
2. Resolution: 1Hz.
3. Output waveform: sine wave, square wave, triangular wave, forward sawtooth wave wave, reverse sawtooth wave wave.
4. Sine wave distortion:1% below 1kHz,0.5% above 1kHz.
5. Output amplitude: maximum ± 10V (P-P)
6. Output impedance: 50 ohms.
7. DC offset: maximum ± 10V, related to closing function.
8. There are filters that can be turned on and off, which can adapt well to sinusoidal and pulse waveform output.
8. Power supply: DC3.5-10V. It is recommended to use a DC5V adapter and a 3.7V lithium battery for battery power supply.
Package includes:
1 x FG-100 DDS Function Signal Generator
1 x USB power adapter cable
Termen de livrare:
1-2 zile de la data confirmarii comenzii prin Curier
Plata se va face ramburs,direct la curier,la primirea coletului.
Comenzile multiple sunt livrate intr-un singur colet si suporta o singura taxa de transport!
Pentru a vizualiza celelalte oferte ,click pe anunturile vanzatorului.
FG-100 DDS Function Signal Generator Frequency Counter 1Hz - 500KHz Signal Source Module Sine+Square+Triangle+Sawtooth Waveform
Main features:
Compact in size, fully functional, easy to operate, and easy to carry. It can be powered by an adapter or a lithium battery. Together with an oscilloscope, it can be used for electronic circuit testing and debugging, as well as testing and measuring the frequency characteristics and pulse response of audio amplifiers. Due to the good accuracy and frequency stability of DDS, it is also very suitable for oscilloscope scanning time factor calibration. The square wave output is suitable for adjusting the pulse characteristics of oscilloscope attenuators and probes.
Main technical indicators:
1. Frequency range: Sine wave 1Hz-500kHz
(The frequency with flat output amplitude reaches 200 kHz, and the output amplitude will decrease as the frequency further increases),
Other waveforms range from 1Hz to 20kHz (but the upper limit of adjustable frequency is not limited. If there is no high requirement for distortion and shaking, the frequency can be further increased).
2. Resolution: 1Hz.
3. Output waveform: sine wave, square wave, triangular wave, forward sawtooth wave wave, reverse sawtooth wave wave.
4. Sine wave distortion:1% below 1kHz,0.5% above 1kHz.
5. Output amplitude: maximum ± 10V (P-P)
6. Output impedance: 50 ohms.
7. DC offset: maximum ± 10V, related to closing function.
8. There are filters that can be turned on and off, which can adapt well to sinusoidal and pulse waveform output.
8. Power supply: DC3.5-10V. It is recommended to use a DC5V adapter and a 3.7V lithium battery for battery power supply.
Package includes:
1 x FG-100 DDS Function Signal Generator
1 x USB power adapter cable
ID: 268780719
Contactează vânzătorul
xxx xxx xxx
